BST Power (Shenzhen)
Limited
◆ Danger 1: Explosion
Do not subject the PB2 to strong impact.
Do not crush or puncture the PB2.
Do not dispose of the PB2 in a fire.
◆ Danger 2: Fire
Do not expose the PB2 to temperatures above 60 ℃.
Do not place the PB2 near a heat source, such as a fireplace.
Do not expose the PB2 to direct sunlight.
Do not allow the battery connector to contact conductive objects such as
wires.
◆ Danger 3: Electric shock
Do not disassemble the PB2.
Do not touch the PB2 with wet hands.
Do not expose the PB2 to liquid.
Keep the PB2 away from children and animals.
◆ Danger 4: Damage to PB2
Do not let the PB2 contact with liquid.
Do not subject the PB2 to high voltage.
Do not place anything on the top of the PB2.
1.2.2 PB2 Operation Guide
Only use the PB2 according to the instructions.
The communication address of the product must be set before use, which
can be realized through DIP Switch.
To Next Page
Loading...
General