If the PB2 is defective, cracked, damaged or otherwise damaged or unable
to work, do not use it.
Do not attempt to open, disassemble, repair or modify the PB2.
Do not bump, pull, drag or step on the PB2, and do not let it be under any
pressure.
Do not install the battery in a closed place with poor ventilation.
Do not mix batteries of different models or manufacturers.
This product can be installed indoors and outdoors. However, if it is installed
outdoors, please do not expose it to sunlight or water, because they may
cause performance degradation, shortened warranty period or even product
damage.
Ensure that there is no water source above or near the PB2, including faucet
and downpipe.
This product can only be used with compatible inverters. Please contact
dealer for a list of compatible inverters.
1.3 Emergency Handling
When the following emergencies occur, please follow the corresponding
guidelines.
1.3.1 Fire
FM-200 or CO2 fire extinguisher is recommended. If the fire is not from the
battery, ABC fire extinguisher is recommended.
If there is a fire where the PB2 is installed, do the following:
1. When a fire occurs around the battery, please extinguish the fire as soon
as possible to prevent the battery from catching fire.
2. If the PB2 has caught fire, do not try to extinguish the fire, and evacuate
people immediately.
3. If the battery is on fire, it will produce toxic and harmful gases. Keep away
from it.
To Next Page
Loading...
General