BT 2000 User Manual

13
eFax 2000 - Edition 4 – 14th November ’00 (3313)
Note
To connect both an answering machine and a
telephone, first connect your answering machine to the
eF@x 2000 and then insert the telephone cable into
the telephone socket on the answering machine
5 Connect a telephone or answering
machine
If you want to connect an answering machine you
must set the reception mode of your eF@x 2000 to
TAD/FAX AUTO SW MODE in order for the
answering machine to work. See page 22.
• Plug the TAD adaptor lead into the TEL 1 socket
at the back of the machine.
• Plug the answering machine (or telephone) line
cord into the TAD adaptor socket.
4 Connect the power and telephone line
Plug one end of the telephone line cord into the
LINE socket at the back of the machine.
Plug the other end into the telephone wall socket.
Plug the mains power cable into the socket on the
back of the machine and the other end into a mains
power socket.
Switch your eF@x 2000 on using the On/Off switch.
Display shows the time and reception mode.
Your machine is now in standby, ready to send
and receive faxes.
Caution
Before connecting power, ensure that the power switch
is OFF (The side nearest 0 is down).

BT 2000 Specifications

General

Type	Cordless Telephone
Answering Machine	Yes
Caller ID	Yes
Phonebook Capacity	50
Number of Handsets	1
Range Indoor	50 meters
Range Outdoor	300m