BT 2000 User Manual

Please note
IF THE MAINS POWER IS SWITCHED OFF OR FAILS
• All documents scanned into the memory are lost.
• All faxes received into the memory are lost.
• Dialling and transmitting settings for documents
loaded into the document feeder are lost.
Your eF@x 2000 will print a report informing you of
a power failure. The report will show details of the
faxes (incoming and outgoing) that you have lost and
which may need to be resent. See ‘Printouts and
Reports’, page 48.
SELECT
FUNCTION
YES
NO
SELECT
FUNCTION
YES
8
TUV
0
USER
PROG.
26
eFax 2000 - Edition 4 – 14th November ’00 (3313)
To reject unsolicited faxes and/or bar
outgoing calls to any numbers not stored
in the directories
You can set your machine to receive faxes
only from numbers that are stored in the
One Touch or Auto Dial memories (or that
have the same last 4 digits as stored
numbers). Additionally, you can also prevent
dialling to any numbers except those stored
in the memory.
Press
SELECT FUNCTION.
Press
USER PROG.
Display shows FUNC. PROGRAMMING
Press YES. Display shows FUNCTION NO. [ ]
Press 0.
Press
8. Display shows 08: CLOSED NETWORK
and the current setting.
RX = restrict faxes received.
T/R = restrict faxes sent and received
OFF = no restrictions.
Press
NO until the setting you want is
displayed.
Press
YES to confirm.
Press
SELECT FUNCTION to return to
standby.
Dual access
In order to give you maximum efficiency, you can load
and prepare documents for faxing while your machine
is sending or receiving another message or printing.
While sending faxes
After your eF@x 2000 has finished scanning a
document into the memory and is transmitting from
memory, you can:
• Store another document in the memory and
prepare to send it.
• Continue to store other documents in the memory
so long as you have enough memory free.
• Make copies of documents.
While receiving faxes
You can:
• Load another document into the memory and
prepare to send it.
• Continue to store other documents in the memory
so long as you have enough memory free.
• Continue to receive faxes while earlier messages
are being printed (providing your machine is set
to memory reception mode).

BT 2000 Specifications

General

Type	Cordless Telephone
Answering Machine	Yes
Caller ID	Yes
Phonebook Capacity	50
Number of Handsets	1
Range Indoor	50 meters
Range Outdoor	300m