To read the print counter
The print counters keep count of the total
number of pages your eF@x 2000 has
printed and scanned. The drum counter
should be reset each time the image drum
unit is replaced, see ‘Replacing the image
drum unit’, page 75.
Press SELECT FUNCTION.
Press
COUNTER DISPLAY.
Display shows the
DRUM COUNT
.
Press
NO to scroll through the display
DRUM COUNT
,
PRINT COUNT
and
SCAN COUNT
.
Press
SELECT FUNCTION to return to
standby.
SELECT
FUNCTION
SELECT
FUNCTION
COUNTER
DISPLAY.
NO
To answer a voice request
When you hear a warbling sound:
Lift the handset.
Press
V. REQUEST.
Please note
Providing you have stored a call back number on your
machine (see page 14) your eF@x 2000 automatically
sends a call back message giving a phone number
where you can be reached if no-one is available at the
other machine to answer a voice request.
HOOK
V. REQUEST
To send a voice request
During a fax call:
Press V. REQUEST. Display shows
VOICE
REQ. ACTIVATED
When the other person answers your
request, your machine gives a warbling
sound. Display shows
LIFT HANDSET AND
PRESS VOICE REQUEST
.
Lift the handset on the attached phone.
Press
V.REQUEST on your eF@x 2000.
HOOK
V. REQUEST
HOOK
V. REQUEST
Please note
To be able to use voice request while sending a
fax, user function
17:MEM./FEEDER SW.
must be set
to FEED and
25:INSTANT DIALLING
must be set
to OFF (see ‘To send documents from the feeder
tray’ on page 24).
28
eFax 2000 - Edition 4 – 14th November ’00 (3313)
Voice request
When sending a fax, the voice request lets the
person at the other machine know you want to talk
to them. They can also send a voice request to you.
If you are sending a fax, you can answer a voice
request when all pages have been sent.
If receiving a fax, you can answer a voice request
after the current page has been received.
A voice request is indicated by a warbling tone from
your eF@x 2000. If you do not respond within 6
seconds, the request is cancelled.
You must have a phone attached to your eF@x 2000
so that you can speak to the caller.