BT 2000 User Manual

33
eFax 2000 - Edition 4 – 14th November ’00 (3313)
To view a group
Press SELECT FUNCTION.
Press
LOCATION PROG.
Display shows LOCATION PROGRAMMING
Press
#
. Display shows GROUP SETTING [ ]
Enter the group number you want 1-5.
Display shows the group number and
SELECT LOC. (S)
Press START to scroll through the entries
in the group.
To send a fax to a group
Load the document.
Press
AUTO DIAL.
Press
#
.
Enter the number of the Group you want.
Press
START.
Display shows ENTRY IS OK?
Press START to begin.
SELECT
FUNCTION
LOCATION
PROG.
#
START
Please note
You can add a second group by pressing
#
and the
next group number you want.
You can add additional numbers by pressing a
ONE TOUCH button, or the AUTO DIAL button
plus the 2-digit location of the number you want.
AUTO DIAL
#
START
START
To add entries to a group before sending
Load the document.
Press
AUTO DIAL.
Press
#
.
Enter the number of the Group you want.
Press
START. Display shows ENTRY IS OK?
DIAL (START) CHECK (–––>)
Press NO. Display shows PRINT ENTRY
REPORT? YES (<––– ) N O ( –––>)
Press NO. Display shows CHECK LOCATIONS
YES (STR/LOC.) EXIT (–––>)
Enter the number you want to add using
One touch, Autodial or the keypad. The
display shows the name/number and ENT
(STR) EXIT (LOC./–––>)
Press START to accept the number.
Press
NO when you have added all the
numbers you want. Display shows ENTRY
IS OK? DIAL (START) CHECK (–––>)
Press START to begin sending.
Please note
To cancel at any time during these steps, press the
STOP button repeatedly until the document is ejected.
AUTO DIAL
#
START
START
START
NO
YES
NO

BT 2000 Specifications

General

Type	Cordless Telephone
Answering Machine	Yes
Caller ID	Yes
Phonebook Capacity	50
Number of Handsets	1
Range Indoor	50 meters
Range Outdoor	300m