39
eFax 2000 - Edition 4 – 14th November ’00 (3313)
To select a ONE TOUCH number:
Press the ONE TOUCH button you want.
If the display asks for confirmation, press
the START button. You can then select
another one touch number.
Or
To select an AUTO DIAL number:
Press AUTO DIAL.
Enter the 2-digit location number you want.
If the display asks for confirmation, press
the
START button. You can then select
another auto dial number.
Or
To enter a number from the keypad:
Dial a number as normal.
Press
START.
If you want to enter another number you
must start entering within 3 seconds. You
can enter up to 10 fax numbers.
Press
START again.
Display shows
ENTRY IS OK?
DIAL (START) CHECK (–––>)
Press START to begin faxing.
YES
AUTO DIAL
Please note
You can add a second group by pressing # and the
next group number you want.
AUTO DIAL
START
START
START
To send a delayed fax to multiple
locations
Load the document.
Press
SELECT FUNCTION.
Press
DELAYED TX. Display shows
DELAYED TX DATE
and the current date.
If you want to send the fax today:
Press YES. Display shows
DELAYED TX TIME
If you want to send the fax another day:
Press NO. Display shows
DELAYED TX DATE
Use the keypad to enter the date you want
the fax to be sent – up to three days in
advance.
Press
YES. Display shows
DELAYED TX TIME
Enter the time:
Use the keypad to enter the time you want
the fax to be sent. Use the 24 hour clock,
e.g.
0800
= 8.00 am,
19.30
= 7.30 pm.
Press
YES. Display shows
SELECT LOCATION
To enter the fax destination numbers
To select a group:
Press AUTO DIAL.
Press
#
.
Enter the number of the Group you want,
using the One Touch buttons 1-5.
NO
YES
YES
SELECT
FUNCTION
DELAYED
TX
Please note
If you pause for more than 3 seconds after entering
a number, the display will show
MULTI LOCATION
and the numbers set for 5 seconds. You can continue
to enter numbers whilst this is in the display.
START
START
To Next Page
Loading...
Need help?
General
