To set your eF@x 2000 for Fax2Net dialling
When you receive the Registration
Confirmation fax from Fax2Net you can set
up your machine for using the Fax2Net
service.
Press
SELECT FUNCTION.
Press
USER PROG.
Press
7. Display shows
7: FAX NETWORK PRG
Press YES. Display shows
SERVER TEL NO:
Enter the server telephone number shown
on your Registration Confirmation.
If you need to dial a number to get an
outside line, enter that number first.
Press
10/PAUSE = pause.
Press
8/+ = +
Press 9/SPACE = space
Press
HYPHEN = -
Press
YES and NO to move the cursor.
Press
START. Display shows
ACCOUNT NO.
Enter the Fax2Net account number and PIN
shown on your Registration Confirmation as
one number.
Press
START.
Display shows
INTERNATIONAL PREFIX
Enter the international prefix you normally
use for international phone calls. (00 when
in the UK).
Press
START.
To store an e-mail address
You can store e-mail addresses of up to 64
characters. Before you can enter an e-mail
address, you must enter your server and
account details, (see ‘To set your eF@ax
2000 for Fax2Net dialling’).
Press
SELECT FUNCTION.
Press
LOCATION PROG. Display shows
LOCATION PROGRAMMING
Press the ONE TOUCH button under which
you want to store the address. Display
shows
ONE TOUCH KEY PRG
53
eFax 2000 - Edition 4 – 14th November ’00 (3313)
Press SELECT FUNCTION to return to
standby.
You can now begin sending and receiving
e-mail and fax messages using your Fax2Net
account.
Fax2Net Customer Support
If you have any questions about the service, please call
the Fax2Net Customer Support Centre at 0207 341
5523. Lines are open 9am-5pm, Monday – Friday.
E-mails
SELECT
FUNCTION
SELECT
FUNCTION
YES
To Next Page
Loading...
Need help?
General
