62
eFax 2000 - Edition 4 – 14th November ’00 (3313)
26: RESTRICT ACCESS ON or OFF
Lets you select whether or not you want prevent
unauthorised people from using your machines.
Select On to activate and then set your restricted
access codes. See page 64. Original setting = OFF.
27: WIDTH REDUCTION ON or OFF
Switch to On to print your incoming faxes at a
slightly reduced width. Original setting = ON.
28: ONE TOUCH PARAM
This allows you to make changes to the settings of
a ONE TOUCH button, without changing the normal
communications settings used by your machine.
23: MEM. FULL SAVE ON or OFF
If the memory when storing pages, the display
shows
MEMORY OVERFLOW
before changing to
SEND
SCANNED PAGES </Yes No/>
If you press NO
Scanning stops and the display shows
MEMORY
OVERFLOW REFER TO USER GUIDE
. Now press STOP
and remove the remaining pages from the document
feeder. Any pages of the document scanned into the
memory are deleted.
If you press YES
All the pages scanned into the memory will be sent.
Then the display changes to
RELOAD DOCUMENT
.
You can send the remaining pages as a separate
transmission. Original setting = ON.
24: CONTINUOUS TONE ON or OFF
When switched On, your machine will give a
continuous tone while receiving a fax. Pressing
STOP once turns off the tone. When switched Off,
your machine gives a short beep after each fax
received. Original setting = OFF.
25: INSTANT DIALLING ON or OFF
With this feature switched On, and when sending a
fax to a single destination, your machine
automatically scans the document into the memory
and dials the number. Original setting = ON.
When set to On, and you do not press the NO
button within one minute the messages
SEND
SCANNED PAGES
, your machine will send the pages
automatically.
When set to Off, and you do not press the NO button
within one minute the messages
SEND SCANNED
PAGES
, your scanned pages are deleted from the
memory.
To Next Page
Loading...
Need help?
General
