BT 2000 User Manual

63
eFax 2000 - Edition 4 – 14th November ’00 (3313)
Memory password
When you have your machine set to receive faxes to
memory (select MEM RECEIVE MODE using the
AUTO REC button, see page 22), you can prevent
unauthorised persons from printing out faxes by
setting a password.
Please note
If a password has been set and MEMORY
RECEIVE RX MODE selected, you will not be able
to print out faxes, change the reception mode or
change the password unless the current password
has been entered.
To set distinctive ringing
To use this feature you must subscribe to
the distinctive ring service supplied by your
telephone service provider.
You should also be ready to ring your fax
machine from another number.
Press
SELECT FUNCTION.
Press USER PROG.
Display shows 1: FUNC. PROGRAMMING
Press YES.
Display shows FUNCTION NO. [ ]
Enter 12.
Display shows 12: DISTINCTIVE RING
Press NO to switch from OFF to SET.
Press
YES.
Display shows SETUP FAX RING
CALL FAX NUMBER NOW
Within 90 seconds, call your eF@x from a
phone on another line, (dial the number that
gives the distinctive ring).
When your machine begins to ring:
The display shows AUTO DETECTING RING
PATTERN
Your eF@x 2000 automatically
detects and remembers its assigned ring
pattern.
When it has finished, the display changes to
DISTINCTIVE RING SET. RESULT – OK .
The display then changes to DISTINCTIVE
RING [ON]
Press YES to confirm.
Press SELECT FUNCTION to return to
standby.
Please note
If your eF@x 2000 does not detect the ring pattern, the
display shows DISTINCTIVE RING SET RESULT = NG .
If this happens, repeat these steps.
SELECT
FUNCTION
USER
PROG.
YES
NO
YES
YES
SELECT
FUNCTION

BT 2000 Specifications

General

Type	Cordless Telephone
Answering Machine	Yes
Caller ID	Yes
Phonebook Capacity	50
Number of Handsets	1
Range Indoor	50 meters
Range Outdoor	300m