BT 2000 User Manual

5. Insert the new unit into your machine. Make sure
that the tabs on both sides of the drum slot in as
shown. Then press down firmly on both ends until
it clicks into place.
6. Install a new toner cartridge (see ‘Replacing Toner
Cartridge’, page 73) and close the top cover and
control panel.
7. Wait for the display to show the current time and
answering mode.
8. Press SELECT FUNCTION.
Press
COUNTER DISPLAY.
Display shows DRUM COUNT
Press YES to reset the drum unit counter
to zero.
Press
SELECT FUNCTION to return to
standby.
76
eFax 2000 - Edition 4 – 14th November ’00 (3313)
SELECT
FUNCTION
COUNTER
DISPLAY
YES
SELECT
FUNCTION
2. Pull the control panel up and forward.
3. Remove the old image drum unit (with its toner
cartridge), wrap it in the packaging from the new
image drum unit and dispose of safely.
4. Remove the protective sheet from your new
image drum unit.

BT 2000 Specifications

General

Type	Cordless Telephone
Answering Machine	Yes
Caller ID	Yes
Phonebook Capacity	50
Number of Handsets	1
Range Indoor	50 meters
Range Outdoor	300m