BT BT1200 User Manual

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Settings 35
There are 5 base ringer volume
levels plus Ringer Off. The
default setting is Level 3
If you’re connected to a
switchboard, you might
need to enter an access code
(e.g.9) before each number
is dialled. Your BT1200 can
store an access code which is
automatically dialled before
each number.
If you wish to revert to not
using a PBX access code, you
need to go into the PBX code
menu and delete all the digit
by selecting
Del. , then press
to save.
Set the base ringer volume
1. Press
, scroll to BS SETTINGS and press .
2.
BS RINGER is displayed, press until RING VOLUME
is displayed and press
.
3. The current base ringtone will play at the current
volume. Use the
or button to increase or
decrease the volume, or turn the ringer off. You will
see the volume level change on the display.
4. Press
to save your choice. You will hear a
confirmation tone.
Set a PBX access code
1. Press
, scroll to BS SETTINGS and press .
2.
BS RINGER is displayed, press until PBX ACCESS is
displayed and press
.
3. Enter the number you want (maximum of 1 digit) and
press
to save. You will hear a confirmation tone.

BT BT1200 Specifications

General

Brand	BT
Model	BT1200
Category	Cordless Telephone
Language	English