BT BT1200 - Quick Set-up Guide; Where to put your phone; Plug in

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Where to put your phone
• Place the base within
3 metres of a mains power
socket and 1.8 metres of a
phone socket so the cables
will reach.
• Don’t place the phone or
base in a bathroom or
other humid area.
• The product works by
sending radio signals
between the handset and
base. The strength of the
signal depends on where you
position the base. Putting it
as high as possible can help
give you the best signal.
IMPORTANT
• The base station should
be plugged into the mains
power socket all the time.
Quick set-up guide4
1 Plug in
1. Plug the mains power
adaptor into the base,
with the cable clipped
in the groove provided.
2. Plug the other end
of the power adaptor
into the wall power
socket and switch on.
3. The telephone line cord is already fitted, plug the
other end into the wall socket.
066773
1
2
3