11
If you experience any problems, please visit www.bt.com/producthelp
M1 – M11 memory buttons
Dial a one-touch memory number
1. Lift the handset, or press
, then press the one-touch button you want.
The stored number is dialled.
Storing a pause in a number
A pause is normally inserted in a stored telephone number after a switchboard
access code (e.g. 9) to allow the switchboard time to get an outside line before
the number is dialled. For example,
9 – Pause – 08702405522.
1. To enter a pause, press
in the appropriate place when storing the number.
To Next Page
Loading...
