BT Diverse 6110 - Dial Mode

54
BT Diverse 6110 ~ Issue 2 ~ Edition 1 ~ 06.04.05 ~ 6794
It is possible to switch from pulse
to tone by pressing .
2. Scroll DOWN to HANDSET PRIORITY and press OK.
Use UP or DOWN to select between:
ALL HANDSETS – all handsets ring together.
Press OK to confirm.
SELECTED HANDSET – one handset rings before the
others. Display shows
SELECT HANDSET and the handset
numbers. Use UP or DOWN to select the handset that
you want to ring before the others. Press OK. Display
shows
RING DELAY . Press UP or DOWN to choose 2, 4,
6, or 8 rings before the other handsets ring, then press
OK to confirm.
Dial mode
Your BT Diverse 6110 is pre-set to Tone dialling.
You can switch to Pulse dialling which may be necessary
if you are using your BT Diverse 6110 with an older style
switchboard.
1. Press MENU. Scroll DOWN to display
BASE SETTINGS
and press OK.
2. Scroll DOWN to
DIAL MODE and press OK. The current
setting is indicated with a ✔. Press UP or DOWN to
highlight
TONE or PULSE and press OK to confirm.
Base settings