BT Versatility - Mapping Incoming Calls to a Group [From a Network Line]; Note on Incoming Call Mapping

BT Versatility
Get started user guide
12
Mapping Incoming Calls to a Group (From a Network Line)
Instruction Action Menu Display
From the System Programming Select Option
Sub Menu Select [Lines] -System
-Extensions
-Lines
Select Select Option
[Incoming Ringing] -Equipped Lines
-Group Programming
-Incoming Ringing
Select the Line or Access Select Line
-Line 1
-Line 2
-Access 1
-Door Intercom
Select the time Select Option
-Day Mode
-Night Mode
-Day & Night Mode
Select the Destination for Incoming Select Destination
Calls on this Line or Access [ Group In -Extension
This Case] -Group
-Auto Attendant
Select the Group which is to receive Select Group
Incoming Calls on this Line or Access -Group 1 Group 4-
during the relevant Time Period -Group 2 Group 5-
-Group 3 Group 6-
Note on Incoming Call Mapping
You may map Incoming Calls on Specific Lines to be presented to different Groups in
Day and Night Mode.
Scroll
Scroll