BT Versatility
Get started user guide
30
Configuring the Internet Module
This section describes how to configure basis Network Settings on the
Internet Module to enable you to connect to the Internet, and to an ISDN
or ADSL Internet Service, assuming that you accept all default Internal
Network Settings. Please refer to the Internet Module User Manual
provided on the enclosed CD-ROM if you need to configure additional
options on the Internet Module.
• When the Internet Module is
installed and running run the
Wizard tool on a PC connected
to the system via the
V.24/Serial Port Interface.
• When you run the application
Screen 1 will be displayed.
From this screen Select the
‘Installation Wizard’
Screen 1
In the next screen displayed (Screen 2), select either ISDN or ADSL
depending on the type of connection you have to the Internet.
To Next Page
Loading...
