BT Versatility
Get started user guide
26
Page Protect
Removes an extension from the paging group
Permanent CLIR
Allows an extension to be set so that it never sends the CLI number
when making an outgoing call (CLIR)
Permanent COLR
Allows an extension to be set so that it never shows the CLI number
during a connected incoming cal (COLR)
Port Swapping
Allows 2 extensions to be swapped on the system for administration
or programming purposes
Restrict use of PA
Prevents an extension from accessing the PA System if connected to
the system
Reverse Cadence
Allows the administrator to swap the ringing cadence used for
internal and external calls
Set Restriction Classes
Allows Call Restrictions to be placed on an extension by extension
basis. Different rules can be applied day and night if required
Sys Speed Dial O/Ride
Allows an extension to dial a number from the System Store even if
that area code is normally barred from that extension
Tele-Secretary
Allows the call recipient see who the call is for before answering, this
feature is ideal where one secretary answers calls on behalf of several
managers
Tone Protect
Allows an extension to be protected from tones at all times
Voice Boxes
Allows the administrator decide which extensions have individual
Voicemail Boxes
Extension Reset
You can cancel the following if they have been programmed on your
set, Do Not Disturb, Call Divert, Ring Back, Display Messaging,
Reminder Call
To Next Page
Loading...
