VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Automatic Scan
Resume Method
Scan is disabled with a Radio Reboot, or by Pressing a
Menu Key / PTT
Scanning will resume after transmitting (or other Menu
Operations)
Scan Memory during Radio Reboot: If scanning was
active when the radio was powered down, the radio
will resume scanning on restart. (Scanning also
resumes after transmitting or other Menu Operations)
Power on Scan: The radio will start scanning upon
turning on - no matter what state it was in when
powering down. Also, the radio will scan after Menu
operations or transmitting
TRACKED is used with Menu 54 and will transmit in
response to the active receiving channel (depending on
the TMR delay time you have set on Menu 54 before
returning to the primary selected channel.
FIXED- Will only TX on Primary Selected Channel
ADD GMRS channels to memory channels
between 000-255
ADD NOAA channels to memory channels
between 000-255- NOAA Channel number is
found on Page 27
Turn off earphone operation
Use Earphone + Internal Speaker
Initialize to
Factory Defaults
Menu and Channel Initialization
To Next Page
Loading...
