VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Dual, Tri, and Quad Watch (TMR)
!
In certain situations, the ability to monitor two, three or even four channels at once can be a valuable
asset.
The BTECH GMRS-50V2 features Dual, Tri, and Quad Watch functionality with the ability scan between
two to four frequencies at a fixed interval and to lock the transmit frequency to one of the four channels
it monitors
1. Press the [MENU] key to enter the menu.
2. Enter 0 on the numeric keypad to get to the TMR Watch Settings
3. Press [MENU] to select which channels are monitored (See Appendix A).
4. Use the and keys to enable or disable.
5. Press the [MENU] key to confirm.
6. Press the [EXIT/AB] key to exit the menu.
Due to the way the BTECH GMRS-50V2 is constructed, whenever one of the A, B, C, or D Frequencies
(VFO/MR) goes active, it will default to transmit on that channel for the time you have selected on
Menu 54 – this can be turned off and is explained below:
To Next Page
Loading...
