ECM
®
830 Electroporation System
Page 8 www.btxonline.com
Electrical & Technical Specifications
Standard Capabilities:
Display Type: 20-character by
4-line liquid crystal LED
backlit
Power Source
Voltage 100 to 240 Vac, 50 to 60 Hz,
CAT II
Power Pulse: 500 W Idle: 150 W
Fusing T2.5 250 V
Environmental Characteristics:
Intended Use Indoor use only
Operating Temperature 10° C to + 40° C
Cooling Convection through metal
case
Relative Humidity 90% relative humidity
Altitude 2,000 m (operating)
Mechanical Characteristics:
Footprint 12.5” x 12.25” x 5.5”
(31.75 x 3.12 x 13.97 cm)
(W x D x H)
Weight 15 lbs (6.8 kg)
Controls Single rotary encoder with
integrated push button
Electrical Characteristics:
Voltage 5 to 500 Volts (LV mode) @
1 Volt resolution
30 to 3000 Volts (HV mode)
@ 5 Volts resolution
(Voltage Delivery @ 5%
accuracy and Voltage
Monitoring @ 5.0% accuracy)
Pulse Length 10 µs to 999 µs (LV mode) @
1 µs resolution
1 ms to 999 ms (LV mode) @
1 ms resolution
1 s to 10s (LV Mode) @ 0.1 s
resolution
10 µs to 600 µs (HV mode)
@1 µs resolution
To Next Page
Loading...
