BTX ECM 830 - General Information; Serial Number; Calibration; Warranty

ECM
®
830 Electroporation System
Page 3 www.btxonline.com
General Information
Serial Number
The serial number for the ECM
®
830 is located on the rear of the
instrument case. All inquiries concerning these products should refer
to the serial numbers on the units.
Calibration
There is no calibration required for the ECM
®
830.
Warranty
BTX - Harvard Apparatus warranties the ECM
®
830 for a period of two
years from the date of purchase. At its option, BTX – Harvard
Apparatus will repair or replace the unit if it is found to be defective as
to workmanship or materials. This warranty does not extend to any
instrumentation which has been (a) subjected to misuse, neglect,
accident or abuse, (b) repaired or altered by anyone other than
BTX - HARVARD APPARATUS without BTX - HARVARD APPARATUS’
express and prior approval, (c) used in violation of instructions
furnished by BTX - HARVARD APPARATUS. This warranty extends
only to the original customer purchaser.
Failure to use the Enhancer 3000 High Voltage probe to connect a
BTX Generator to an external digital oscilloscope for monitoring will
result in voiding your warranty; connecting directly to the external
monitoring equipment or modified monitoring setup will damage the
Generator.
IN NO EVENT SHALL BTX - HARVARD APPARATUS BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not
allow exclusion or limitation of incidental or consequential damages so
the above limitation or exclusion may not apply to you. THERE ARE
NO IMPLIED WARRANTIES OF MERCHANTABILITY, OR FITNESS
FOR A PARTICULAR USE, OR OF ANY OTHER NATURE. Some states
do not allow this limitation on an implied warranty, so the above
limitation may not apply to you.
Without limiting the generality of the foregoing, BTX - HARVARD
APPARATUS shall not be liable for any claims of any kind whatsoever,
as to the equipment delivered or for non-delivery of equipment, and
whether or not based on negligence.
Warranty is void if the ECM
®
830 is changed in any way from its
original factory design or if repairs are attempted without written
authorization by BTX - HARVARD APPARATUS.
Warranty is void if parts, connections or cell fusion chambers not
manufactured by BTX - HARVARD APPARATUS are used with the
ECM
®
830.