6.8 Printing
Online documentation
To keep an online log of an extraction, the B-811 must be connected to a printer. The extraction data
are then printed out accordingly for each event that occurs.
SOXHLET warm: Mode
PROGRAM: Currently selected program
Solvent: (solvent being used)
Sample: (sample)
Day: Displays the day, changes for
extractions taking longer than
24 hours
Time: Extraction time remaining
Step: Currently active extraction step
Info: Result, such as Start/Stop,
Error messages
Heater: Up: upper heating stage
Low: lower heating stage
Cycles: Number of cycles for heating
elements 1 - 4
Gas: Inert gas status: Y = open
N = closed
Fig. 6.1: Online printout with captions
Program documentation
/ Select the program
SELECT: Mode blinks
Program display blinks
„Pr“ appears in the display
SELECT: Inert gas status, Y = open /
N = closed
Fig. 6.2: Program printout without captions
To Next Page
Loading...
