Buderus AM10 - Communication Fault (5 H); Sensor Fault and Emergency Operation

User Manual
AM10 - We reserve the right to make any changes due to technical modifications!12
2
Target point of heating characteristics
The "Mode" key was used to select the " "
symbol. This concerns the target point of the
heating characteristic corresponding with an
outdoor temperature of 14 °F. The value will
flash and can be changed using the plus "
+"
and minus "–" keys.
Adjustment range: 68 - 194 °F.
Factory setting: 167 °F.
Base point of heating characteristics
The "Mode" key was used to select the " "
symbol. This concerns the base point of the
heating characteristic corresponding with an
outdoor temperature of 68 °F. The value will
flash and can be changed using the plus "
+"
and minus "
–" keys.
Adjustment range: 68 - 194 °F.
Factory setting: 86 °F.
Warm weather shut down (WWSD)
The "Mode" key was used to select the
WWSD temperature " ". This concerns
the maximum outdoor temperature at which
the heating is still operational.
The value will flash and can be changed using
the plus "
+" and minus "–" keys.
Adjustment range: 32 - 86 °F.
Factory setting: 70 °F.
Fig. 13 Display of third menu item
8163
°F
Fig. 14 Display of fourth menu item
100
°F
Fig. 15 Display of fifth menu item
868
°F