EasyManuals Logo

Buderus Logano G334 X Operating Instructions

Buderus Logano G334 X
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Start-up instructions 3
7
We reserve the right to make any changes due to technical modifications.
Operating instructions Logatop BE-A blue burner • Issue 2012/11
3.2 Shutting off gas supply to boiler
1. Set thermostat to the lowest value.
2. Disconnect heating system from the power supply
before carrying out maintenance work.
3. Remove front panel of boiler
4. Turn gas valve ON/OFF button clockwise to OFF
position. Do not use force.
5. If necessary, shut off main gas supply valve.
6. Replace front panel of boiler.
Flame roll-out switch
The boiler is equipped with a flame roll-out switch. If the
flue duct in the boiler is blocked, the flame roll-out switch
responds. Do not try to switch on the boiler. Inform a
qualified service company. The flue duct in the boiler
must be checked for blockage and the flame roll-out
switch replaced. The flame roll-out switch is for one-time
use only. Do not try to use it again.
Fig. 4 Removing front panel of boiler
1 Screws
2 Boiler front panel
1
2
1
Fig. 5 Gas valve
1 ON/OFF button (at ON position)
1

Other manuals for Buderus Logano G334 X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Buderus Logano G334 X and is the answer not in the manual?

Buderus Logano G334 X Specifications

General IconGeneral
BrandBuderus
ModelLogano G334 X
CategoryBoiler
LanguageEnglish

Related product manuals