Buderus Logano plus SB615 User Manual

CAUTION!
Observe the safety instructions of this installation
and maintenance manual before placing the boiler in ope-
ration.
DANGER!
If installation, adjustment, modification, operation or main-
tenance of the heating system is carried out by an unqua-
lified person, this may result in danger to life and limb or
property damage. The directions of this
installation and maintenance manual must be followed
precisely. Contact a qualified service company,
service provider or the gas company if support or
additional information is needed.
NOTICE!
The operating manual is a component of the technical do-
cumentation and must be handed over to the operator of
the heating system. Discuss the instruction in this manual
with the owner or operator of the heating system to ensu-
re that they are familiar with all information required for
operation of the heating system.
In the Commonwealth of Massachusetts this boiler must
be installed by a licensed plumber and gasfitter.
Installation and Servicing
Instructions
Condensing boiler for
operation with fan-
assisted gas burner
7 747 015 037-00.1RS
Logano plus SB615
7 747 016 908 - 04/2011 US
For heating contractors
Please read carefully before
installing and servicing.

Buderus Logano plus SB615 Specifications

General

Brand	Buderus
Model	Logano plus SB615
Category	Boiler
Language	English

Summary

General Safety and Symbols

Safety Instructions

General safety instructions and warnings for installation and operation.

Installation, Operation, and Maintenance Safety

Safety guidelines for installation, operation, conversion, and maintenance.

Customer Instruction

Guidance for explaining boiler operation and maintenance to the end-user.

Explanation of Symbols

Explanation of warning symbols (Danger, Warning, Caution) and information notes.

Intended Use

Regulations and Guidelines

National and Local Regulations

Compliance requirements with national, federal, and local fuel gas, installation, and safety regulations.

Safety Limits and Fuels

Defines safety limits, maximum temperatures, pressures, and approved fuels.

Pack Contents

Specifications, Dimensions, and Connections

Technical Specifications and Dimensions

Detailed technical specifications including output, dimensions, operating parameters, and connection labels.

Boiler Installation

Wall Clearances and Foundation

Recommended and minimum wall clearances and foundation requirements for installation.

Installation Procedures

Thermal Insulation and Outer Jacket Panels

Instructions for fitting thermal insulation jackets and outer jacket panels.

Mounting and Wiring Logamatic Controls

Steps for mounting and wiring the Logamatic control system, including safety precautions.

Burner Door and Boiler Jacket Installation

Procedures for burner door reversal, burner installation, and boiler jacket panel fitting.

Flue System, Neutralizer, and Water Connections

Requirements for flue systems, neutralizer units, and water connections.

Commissioning

Servicing

General Servicing Information

General safety information and requirements for boiler servicing.

Boiler Cleaning Procedures

Detailed steps for cleaning the boiler, including combustion chamber and heat exchangers.

Servicing Checklist and Transport Notes

Checklist for recording servicing tasks and notes for boiler transport.