LAN
USB
USB
EJECT
ON
OFF
AUTO
ROUTER
1
2
3
4
POWER
INTERNET
LAN
USB
USB
EJECT
ON
OFF
AUTO
ROUTER
1
2
3
4
POWER
INTERNET
AirStation
1) connect
2) connect
LAN cable
computer
OFF
AirStation
1) Connect the power supply
power outlet
Chapter 3 Installation
- 13 -
7
Once your computer has booted, the AirStation’s LEDs should be lit as described below:
Power Green LED on.
2.4 GHz Green LED on or amber light is on.
5 GHz Green LED on or amber light is on.
Router Green LED on or o depending on your network.
Diag O
LAN Green LED on or blinking.
Internet Green LED on or blinking.
For LED locations, refer to chapter 1.
5
Connect your computer to one of the AirStation’s LAN ports with the LAN cable.
6
Turn on the AirStation, wait one minute, then turn on your computer.
To Next Page
Loading...
