Buffalo WZR-600DHP User Manual

- 32 -
Chapter 4 Conguration
LAN
Congure LAN-side and DHCP Server settings.
Parameter Meaning
LAN Side IP Address By default, the LAN side IP address is 192.168.11.1 with subnet
mask 255.255.255.0. You may change it here.
DHCP Server
Router Mode only
Enable or disable the DHCP server, which assigns LAN-side IP
addresses automatically.
DHCP IP Address Pool
Router Mode only
Congure the range of IP addresses to be assigned by the DHCP
server and IP addresses to be excluded from that range. Values
from 1-256 may be entered.
LAN Side IP Address
(For IP Unnumbered)
Router Mode only
Set an IP unnumbered LAN side IP address.
Note: A PC with a normal LAN side IP address and a PC with an IP
Unnumbered IP address cannot communicate each other.
Advanced Settings
Router Mode only
Check [Display] to display DHCP server advanced settings options.
Lease Period
Router Mode only
Set the eective period of an IP address assigned by the DHCP
server. Up to 999 hours may be entered.
Default Gateway
Router Mode only
Set the default gateway IP address for the DHCP server to issue to
clients.

Buffalo WZR-600DHP Specifications

General

Brand	Buffalo
Model	WZR-600DHP
Category	Network Router
Language	English