Chapter 4 Conguration
- 59 -
NAS
Disk Management
View the status of and congure attached USB hard disks.
Parameter Meaning
Device Displays information for attached USB drives. To dismount a drive,
click [Remove] in the Device column.
Disk A disk number will be automatically assigned to the drive or you
can choose a number. Select a drive number, or select [Do not
assign], then click [Apply].
Partition Displays the partition information for the selected USB drive. Click
[Format] to format the drive. Note: formatting a drive will erase all
information on it.
Re-recognize USB Devices Click this to re-scan for connected USB drives.