Increasing Speed While Using
Cruise Control
There are two ways to increase speed while using
cruise control:
• Use the accelerator pedal to get to the higher
speed. Press the SET button at the end of
the lever, then release the button and
the accelerator pedal. You will now cruise at
the higher speed.
• Move the cruise switch from ON to R/A. Hold
it there until you get up to the speed you
want, and then release the switch. To increase
your speed in very small amounts, move the
switch to R/A briefly and then release it.
Each time you do this, your vehicle will go
about 1 mph (1.6 km/h) faster.
The accelerate feature will work whether or not
you have set an initial cruise control speed.
Reducing Speed While Using
Cruise Control
There are two ways to reduce speed while using
cruise control:
• Press the SET button at the end of the lever
until you reach the lower speed you want,
then release it.
• To slow down in very small amounts, press
the SET button briefly. Each time you do
this, you will go about 1 mph (1.6 km/h)
slower.
Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase your speed.
When you take your foot off the pedal, your
vehicle will slow down to the cruise control speed
you set earlier.
184
To Next Page
Loading...
Need help?
General
