Bulb Replacement
For the proper type of replacement bulbs, see
Replacement Bulbs on page 404.
For any bulb changing procedure not listed in this
section, contact your dealer.
Halogen Bulbs
{CAUTION:
Halogen bulbs have pressurized gas
inside and can burst if you drop or
scratch the bulb. You or others could be
injured. Be sure to read and follow the
instructions on the bulb package.
Headlamps, Front Turn Signal,
Sidemarker, and Parking Lamps
1. Open the hood. See Hood Release on
page 363 for more information.
2. Push in on the
headlamp panel and
lift up the headlamp
retaining clip
partway, but do
not remove.
3. Remove the wing stud on the upper, outboard
side of the lamp assembly.
4. Unsnap the headlamp assembly by pulling it
forward, away from the vehicle.
399
To Next Page
Loading...
