Buick 2007 Rendezvous User Manual

11. Align the retaining clips on the back of the
headlamp with the rectangular holes in the
mounting panel.
12. Push firmly on both ends of the headlamp to
snap it into position.
13. Push the retaining clip down to its original
position.
14. Reinstall the wing stud.
Taillamps, Turn Signal, and
Stoplamps
1. Open the liftgate. See Liftgate on page 118
for more information.
2. Remove the
two screws on
the inboard
taillamp panel.
3. Pull the lamp directly rearward from the
vehicle.
401

Buick 2007 Rendezvous Specifications

General

Brand	Buick
Model	2007 Rendezvous
Category	Automobile
Language	English