Hood Release
To open the hood, do the following:
1. Pull the hood release
handle with this
symbol on it. It is
located under the
instrument panel on
the driver’s side of
the vehicle.
2. At the front of the vehicle, pull up on the
center of the hood, and push the secondary
hood release to the right.
3. After you have partially lifted the hood, gas
struts will automatically take over to lift and
hold the hood in the fully open position.
Before closing the hood, be sure all filler caps are
on properly. Then, pull the hood down to close.
363
To Next Page
Loading...
Need help?
General
