4. Fill the radiator with the proper DEX-COOL
®
coolant mixture, up to the base of the filler
neck. See Engine Coolant on page 375
for more information about the proper coolant
mixture.
If you see a stream of coolant coming from an
air bleed valve, close the valve. Otherwise,
close the valves after the radiator is filled.
5. Rinse or wipe any spilled coolant from the
engine and the compartment.
6. Start the engine and let it run until you can
feel the upper radiator hose getting hot.
Watch out for the engine cooling fans.
7. By this time, the coolant level inside the
radiator filler neck may be lower. If the level is
lower, add more of the proper DEX-COOL
®
coolant mixture through the filler neck until the
level reaches the base of the filler neck.
Filling in the Radiator Filler Neck Upper Radiator Hose
386
To Next Page
Loading...
