A. Jack
B. Wing Bolt
C. Jacking
Instructions
D. Folding Wrench
E. Wing Nut
F. J-Hook
2. Remove the jack and jacking tools by turning
the wing bolt counterclockwise.
Lift up slightly on the jack to remove it from
the bracket. Then take it out of the storage
compartment.
3. Separate the jack and remove the folding
wrench from the jack.
The tools you will be using include the jack (A),
folding wrench (B), wing nut (C), and J-hook (D).
Removing the Spare Tire (Vehicles
without a Rear Convenience Center)
The compact spare tire is located under the
vehicle, behind the rear bumper. Use the spare
tire hoist to raise, lower and store the compact
spare tire. See Compact Spare Tire on page 450
for more information about the compact spare.
430
To Next Page
Loading...
