Bully Dog ECM Tuner - Cat Engines

33
ECM TUNER
Introduction
Updating
Physical
Installation
Installing the
Tune
Uninstalling
the Tune
Operating the
HDGT
More
Information
Cat
®
Engines
Overview
Phase 1
1. Physically install the ECM Tuner.
2. Prepare to install the tune.
3. Turn the key to the RUN (or ON) position.
4. Choose Install Tuning from the Main Menu.
5. Allow the ECM Tuner to collect information from your
vehicle.
Phase 2
1. Disconnect the microSD memory card from the ECM
Tuner.
2. Use the card reader to connect the memory card to a
computer with Internet access.
3. Use the Update Agent to download the Phase 3 les to
the memory card.
Phase 3
1. Install the memory card into the ECM Tuner.
2. Turn the key to the RUN (or ON) position.
3. Choose Install Tuning from the Main Menu.
4. Follow the onscreen prompts to complete the tune
installation.
In order to provide a basic understanding of the install
process, this simplied preview has been provided. It is
very important that: 1) you have completed the physical
installation described, 2) you have completed thepreparation
steps and 3) you are familiar with the detailed instructions
provided before you attempt to install the ECM Tuner.
Using the Update Agent for Phase 2 of the Cat® engine tune
installation requires registration.