EasyManuals Logo

Bunn Axiom Series Programming Manual

Bunn Axiom Series
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Page 10
"EASY PULSE BREW" times:
Min: Base brew time + 40 seconds
Max: Base brew time + 3:00 minutes
DRIP TIME 0:30
(-) DONE (+)
0 REFILL 155
(-) DONE (+)
ENABLE CLEAN
NO DONE YES
SET PULSE BREW ?
NO YES
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
ADJUSTMENTS & OPTIONAL SETTINGS (CONT.)
This function allows the sprayhead to “pulse” on and off dur-
ing a brew cycle. These times can be set two different ways.
The rst is by setting the total brew time in the "EASY PULSE
BREW" screen. The other option allows the actual times to be
entered in the "MANUAL PULSE BREW" screen.
Adjusts the DRIP TIME (time from end of sprayhead ow to
when liquid stops dripping from the funnel). When the brew
cycle is complete, the display will show "DRIPPING" and will
countdown the time until the funnel empties.
RANGE: "OFF" or 0:05 to 4:00 minutes
Set the time before a cleaning alert will be displayed.
RANGE: 1 to 30 days
Enables the mode function and sets the idle time. Then choose
to have the tank heater(s) turn off, or reduce the tank temp to
(140° F) or (60° C) once the set idle time has expired.
Range: 0.5 to 24.0 hrs
Enables the "FRESHNESS ALERT!" message and sets the
expiration time. The expiration time is the amount of time the
product is allowed to sit in the server before an alert message
is displayed.
Range: 0.5 to 4.0 hrs
Adjusts the sensitivity of the re ll circuit. Water in different
geographical locations can have different conductivities. Make
sure the water in the tank is touching the re ll probe. NOTE:
Always make sure that the # on the right is larger than the #
on the left when water is contacting the tank re ll probe.
NOTE: This will overwrite settings in "BREW METER".
Sets the amount of time a warmer will remain on after being
turned on. Each warmer has an independent timer and is af-
fected by its corresponding switch. NOTE: The lower "Brew"
warmer timer is restarted when brew switch is pressed. Range:
15mins to 6.0 hrs in 15 min increments.
Enabl EnergySavr
NO DONE YES
ENABL WARMER OFF
NO DONE YES
EnableFreshTimer
NO DONE YES
41154 041708

Other manuals for Bunn Axiom Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bunn Axiom Series and is the answer not in the manual?

Bunn Axiom Series Specifications

General IconGeneral
PowerVaries by model (e.g., 1800-3000 watts)
Dimensions14.5 x 9.5 x 11.5 inches
WeightVaries by model
FeaturesDigital display, programmable settings, energy-saving mode, automatic warmer shut-off
CategoryCoffee Maker
ModelAxiom Series
Capacity10 cups
Voltage120V
MaterialStainless steel

Related product manuals