Page 8
SERVICE NUMBER
This function allows the operator to enter in the
telephone number to call if service is needed. The
service number will be displayed anytime there
is a fault message displayed.
Procedure to enter the service number:
1. Press and hold the right hidden switch until
the display reads "BrewWIZARD" then release.
Press and release the right hidden switch until
the display reads: "ENTER SERVICE #?"
2. Press and release "YES" switch. The display
will now read "SCROL THRU #'S NEXT - >
NEXT NUMBER", followed by "SCROLL
DONE NEXT".
3. Press the "SCROLL" switch to increment the
number. When the desired number is shown,
press and release the "NEXT" switch to move
to the next digit in the phone number.
4. Repeat Step 3 until the entire number is en-
tered.
5. Press and release the "DONE" switch. The
display will now read "EXITING BrewWIZARD"
and then "ENTER PASSWORD".
ENTER PASSWORD
This function allows the operator to enter a 3
digit number to access LEVEL 2. If no number
has been pre programmed (0 0 0), then access
is allowed by pressing and releasing the right
hidden switch.
Procedure to enter the "PASSWORD":
1. Press and release the "Digital" switch to in-
crement the fi rst digit.
2. Press and release the "Brewer" switch to
increment the second digit.
3. Press and release the "Control" switch to
increment the third digit.
4. Press and release the right hidden switch. If
the correct password was entered, the display
will now read "SET PASSWORD". If the wrong
password was entered, the unit will revert back
to the main screen.
ADJUSTMENTS & OPTIONAL SETTINGS (CONT.)
ENTER SERVICE #?
NO YES
EXITING
BrewWIZARD
SCROL THRU #'s
NEXT NEXT NUMBER
SCROLL DONE NEXT
PROGRAMMING FUNCTIONS - LEVEL 2
ENTER PASSWORD
0 0 0
41154 041708
To Next Page
Loading...
Need help?
General
