Page 5
- +
This function allows the operator to adjust the brew volume.
Procedure:
1. Press and hold the right hidden switch until the display reads "BrewWIZARD" and release.
2. The display will then read: "BREW OZ: xx.x"
3. Press (-) "Digital" to decrease the amount, or (+) "Control" to increase.
Range: (10 to 192 oz., in .5 oz. increments) or (.30 to 6.60 Liters, in .01 increments)
4. When fi nished, press "DONE". This will take you to the next screen. Press and release the right
hidden switch to continue to the next screen, or press and release the "ENABLE BREW ON/OFF"
switch to return to the main screen.
The functions in the "BrewWIZARD" allow the operator to adjust brew settings and other features.
PROGRAMMING FUNCTIONS - BrewWIZARD (cont.)
BREW OZ:
ADJUSTMENTS & OPTIONAL SETTINGS (CONT.)
This function allows the operator to adjust the brew strength/extraction time. Setting #1 will produce
a non-pulsed brew cycle and the highest (#14) will give you the longest time (utilizing pulse brew).
Procedure:
1. Press and hold the right hidden switch until the display reads "BrewWIZARD" and release.
2. The display will then read: "BREW OZ: xx.x"
3. Press and release the right hidden switch until the display reads "BREW METER"
4. Press (-) to decrease the amount, or (+) to increase. (Range: 1 - 14)
5. When fi nished, press and release the right hidden switch. This will take you to the next screen,
or press and release the "ENABLE BREW ON/OFF" switch to return to the main screen.
BREW METER:
BREW METER 1 BREW METER 14
- +
NOTE: This will overwrite settings in "PULSE BREW"
Weakest (Shortest) Strongest (Longest)
BREW OZ: 64.0
(-) DONE (+)
41154 041708
To Next Page
Loading...
Need help?
General
