To Next PageTo Next PageWhat to do if my Bunn SmartWave APS shows a high tank level during brew?
If your Bunn Coffee Maker displays "HIGH TANK LEVEL-DURING BREW", it indicates that deliming is required. Please delime your coffee maker.
General| Brand | Bunn |
|---|---|
| Model | SmartWave APS |
| Category | Coffee Maker |
| Language | English |
Instructions for connecting the brewer to the electrical supply, ensuring proper voltage and wiring.
Steps for connecting the brewer to the water supply line, including flushing and attachment.
Controls the brew circuit and tank refill, enabling or disabling brewing operations.
Starts the selected 'SMALL' brew cycle when the brewer is enabled.
Starts the selected 'LARGE' brew cycle when the brewer is enabled.
Shows the current status of the brewer: ready, heating, or brewing.
Guides on setting small and large batch brew volumes, including adjustments.
Instructions for configuring pulse brew routines for different brew cycles.
Procedure to reset programming to factory default settings.
Manages brew and refill circuits, enabling or disabling brewing.
Initiates the 'A' brew cycle for a selected batch size.
Initiates the 'B' brew cycle for a selected batch size.
Used for entering programming modes and confirmations.
Shows tank status, brewing, and drip out cycles on the display.
Includes labels for indicating batch size and flavor settings.
Configures brew time, brew meter, and drip out time for brew switches.
Resets programming to default settings, indicated by 'DONE' message.
Detailed steps for cleaning the optional large sprayhead assembly.
Adjusts brew temperature for high altitude conditions.
Enables or disables the energy saving mode.
Controls brewing based on the ready indicator status.
Prevents unauthorized programming changes to the brewer.
