Bunn Axiom Series Service & Repair Manual

Page 11
COMPONENT ACCESS
This section provides procedures for testing and
replacing various major components used in this
brewer should service become necessary. Refer to
Troubleshooting for assistance in determining the
cause of any problem.
WARNING - Inspection, testing, and repair of electri-
cal equipment should be performed only by qualifi ed
service personnel. The brewer should be unplugged
when servicing, except when electrical tests are re-
quired and the test procedure specifi cally states to
plug in the brewer.
WARNING - Disconnect the brewer from the power
source before the removal of any panel or the replace-
ment of any component.
All components are accessible by the removal of
the top cover or warmer housing, front access panel
and warmer plate(s).
Refer to wiring diagrams at the back of this manual
when reconnecting wires.
FIG. 11-1 COMPONENT ACCESS
FIG. 11-2 COMPONENT ACCESS
39132 062309

Bunn Axiom Series Specifications

General

Power	Varies by model (e.g., 1800-3000 watts)
Dimensions	14.5 x 9.5 x 11.5 inches
Weight	Varies by model
Features	Digital display, programmable settings, energy-saving mode, automatic warmer shut-off
Category	Coffee Maker
Model	Axiom Series
Capacity	10 cups
Voltage	120V
Material	Stainless steel