Bunn IMIX-5 - Auger Drive and Hopper Assembly

ITEM PART NO. QTY. DESCRIPTION
13
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
     •IMIX-4Models
     ••IMIX-5Models
   • ••
- 37010.1001 1 1 Hopper Assy (Includes 1 each of items 1-13)
1 36653.0001 4 5 Lid, Hopper
2 32337.0000 8 10 Mixing Blade
3 32386.0001 4 5 Disk, Agitator (30 Tooth)
4 28067.0000 4 5 Bushing, Auger Drive Shaft
5 26940.0002 4 5 Shaft, Auger Drive
6 37011.0001 4 5 Hopper
7 39442.0000 4 5 Auger, Wire (use w/30-tooth Disk)
8 25903.0000 4 5 Elbow, Ejector
9 25743.0000 4 5 Locknut
10 36772.0000* 4 5 Coupling, Hex (Early models only) (Order 37539.1000 Shaft Kit)
11 36774.0000 4 5 Spring, Hopper Coupling
12 36770.0000 4 5 Coupling, Auger Drive
01326.0002 4 5 Screw, Truss Head #10-32 x .25" (Late models only)
13 36771.0000* 4 5 Shaft, Auger Drive Coupling (Early models) (Order 37539.1000 Shaft Kit)
37539.1000 4 5 Shaft Kit, Auger Drive (Includes 01326.0002 Screw)(Late models)
14 36766.0000 - 1 Panel, Hopper Support
36766.0001 1 - Panel, Hopper Support
01311.0000 4 4 Screw, Truss Head #8-32 x .25"
15 20960.0000 4 5 Screw, Shoulder #6-32 x .375"
00991.0002 4 5 Nut, Elastic Lock #6-32
16 - - - - - - - - - - See COVERS, PANELS & DRIP TRAYS
17 37037.0000 4 5 Gearmotor Assy, Auger (Each includes items 18 thru 21)
01311.0000 12 15 Screw, Truss Head #8-32 x .25"
18 32654.0000 1 1 Magnet Hub, 8 Pole #10 ID x 1.0" OD
01512.0000 1 1 Lockwasher, Ext Tooth #10
00991.0003 1 1 Nut, Elastic Lock #10-32
19 33608.1000 1 1 Sensor Assy, RPM
02336.0000 2 2 Screw, Truss Head #4-40 x .38"
20 26401.0000 1 1 Dust Seal, Hopper Motor
21 36773.0000 1 1 Plate, Auger Drive
22 37682.0000 4 5 Housing Assy, Sensor CB (Each includes items 23 thru 26)
01315.0000 4 5 Screw, Truss Head #8-32 x .38"
23 36114.1000 1 1 CB Assy, Powder Sensor
38958.1000 1 1 CB Assy, Powder Sensor (RoHS Compliant)
24 00970.0000 1 1 Nut, Keps #8-32
25 36243.0000 1 1 Housing Sensor CB
26 36764.0000 1 1 Spacer, Circuit Board
27 35260.0000 4 5 Cable Mount, Adhesive (Not Illustrated)
AUGER DRIVE AND HOPPER ASSEMBLY
37259 091007