Bunn ITCB Series - Page 18

ITCB Training Manual
18
Step 6: Replace the seat cup in the hot water faucet:
Unscrew the faucet bonnet from the assembly. □
Remove the old faucet seat cup. □
InstallthenewseatcupBUNNP/N:02766.0000. □
Reassembly is the opposite of disassembly. □
Visually examine the power cord for any damage. □
Visually examine the water supply for any leaks. □
Step 7: Clean the funnel:
Unscrew the outlet tip and remove the tip and screen. □
Sanitize the tip, screen, and funnel with warm water and sanitize solution. □
Step 8: Replace the tea server seat cups:
Drain the server. □
Unscrew the faucet handle. □
Remove and replace the seat cup. □
Step 9:Calibratethesprayheadanddilutionowrates.