To Next PageTo Next Page
Need help?Do you have a question about the Bunn LCA-2 and is the answer not in the manual?
General| Model | LCA-2 |
|---|---|
| Type | Coffee Maker |
| Manufacturer | Bunn |
| Dimensions | 15.2 x 8.6 x 14.8 inches |
| Weight | 10.5 lbs |
| Capacity | 3.8 liters |
| Material | Stainless Steel |
| Power | 1300 watts |
| Voltage | 120V |
| Water Access | Plumbed |
| Dispenser | Faucet |
Main body and access panels.
Support legs, door hinges, and structural brackets.
Drip/cup trays, covers, fasteners, fittings, and decals.
Main door structure, insulation, and frame.
Latches, hinges, handles, buttons, and associated hardware.
Circuit boards, switches, panels, and door decals.
Main cabinet panels and internal insulation layers.
Fan assembly, chiller insulation, thermoelectric elements, and probes.
Latches, covers, brackets, clips, panels, and decals.
Main tank body, lid, gasket, and insulation wrap.
Level probe, temp probe, thermostat, heater, and overflow switch.
Overflow tube, water inlet valve, and connecting fittings.
Primary dispense valve components and repair kits.
Flexible tubing, elbows, and securing clamps.
Chamber for mixing, flow restrictors, and lids.
Various connectors, adapters, and silicone tubing.
Pump motor and its structural mounting components.
Rotor, bearings, rings, cover, and internal pump parts.
RPM sensor, standoffs, screws, and compression bands.
Main power unit, control circuitry, and mounting hardware.
Various switches, thermostats, fuse holders, and fuses.
Cable connectors, terminal blocks, and mounting brackets.
Heat sinks and thermal compound for component cooling.
