Bunn nitron 2 - Dispenser Operating Controls; Compressor and Water Bath Switch; Product Dispense Tap Handles

12
OPERATING CONTROLS
Refrigeration Switch
Product Dispense Handles
Compressor/Water Bath Switch
The refrigeration switch is located on the Electrical Panel of the dispenser near the Circuit Board. This switch
controls power to the water bath pump and relay contacts for the compressor and condenser fan motor.
Product Dispense Tap Handles
Pulling and holding tap handle will initiate product flow from the respective nozzle; releasing the tap handle will
stop the flow.
54261.0001 090817