EasyManuals Logo

Bunn SINGLE SHDBC User Manual

Bunn SINGLE SHDBC
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Page 15
BREW OZ (SETTING OR ADJUSTING BREW VOL-
UMES)
This function allows adjustment of the brew vol-
umes for each batch. The indicator signifi es volume
in ounces per batch.
Procedure for modifying recipes - brew ounces:
Range: 10.0 oz to 400 oz for all three batch sizes
1. Press and hold upper right hidden switch until the
display reads SET NEW RECIPES. Release swich.
Press and hold upper right hidden switch until the
display reads REVIEW RECIPES.
2. Press YES to proceed. The display should now
read NO-NAME, along with MODIFY, SHOW and
NEXT.
3. Press and release NEXT to advance to the desired
coffee name to be modifi ed.
4. Press and release MODIFY. The display should
read BREW OZ: and a batch light will be blinking.
REVIEW RECIPES?
NO YES
3 BATCHES DONE?
NO YES
BREW OZ. XX.X
(-) DONE (+)
% BYPASS XX.X
(-) DONE (+)
NO-NAME
MODIFYSHOWNEXT
(COFFEE NAME)
MODIFYSHOWNEXT
THAT WAS THE
LAST RECIPE
EXIT TO
NEXT FUNCTION
SCREEN
ADVANCES TO ALL OTHER
COFFEE NAMES PROGRAMMED
IN THE BREWER'S MEMORY
WHEN THE LAST COFFEE NAME
IN THE BREWER'S MEMORY IS
DISPLAYED, PRESSING NEXT
WILL EXIT AND THE DISPLAY
WILL THEN READ:
SEE MODIFYING
BYPASS PERCENTAGES
ON THE FOLLOWING PAGE
OR PRESS AND RELEASE
ON/OFF SWITCH TO EXIT THE
BREW OZ: SETUP AND RETURN
TO THE MAIN SCREEN
P2443
PROGRAMMING FUNCTIONS - (cont.)
Press and release the batch size to be modifi ed.
5. Using (-) and (+), set the amount of brew water,
in ounces, to be dispensed over the grounds for
that particular batch size.
6. When fi nished, press another batch size and re-
peat step #5 for that size for each batch size to be
modifi ed. Continue setting all batch sizes.
7. When fi nished setting all batch sizes, press and
release DONE. The display should read 3 BATCH
SIZES DONE?
8. If the three batch sizes are not correct, press and
release NO to return to the BREW OUNCES setup
screen and repeat steps 5, 6 and 7.
9. If the three batch sizes are correct, press YES. This
will advance to the % BYPASS function. Another
alternative is to press and release the
pad to
exit the BREW OZ setup and return to the MAIN
SCREEN.
34025.1 011006

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bunn SINGLE SHDBC and is the answer not in the manual?

Bunn SINGLE SHDBC Specifications

General IconGeneral
BrandBunn
ModelSINGLE SHDBC
CategoryCoffee Maker
LanguageEnglish

Related product manuals