To Next PageTo Next PageHow to prevent damage to Bürkert Timer during transport?
To prevent transport damage to your Bürkert Timer: * Use shock-resistant packaging. * Protect it from humidity and dirt. * Avoid exposing it to extreme heat or cold, which could cause the storage temperature range to be exceeded.
How to clean Bürkert Timer without causing damage?
To safely clean your Bürkert Timer, use a cloth slightly dampened with water or a cleaning product that is compatible with the materials it is made from.
General| Supply voltage | 24 V DC |
|---|---|
| Output | Relay |
| Number of outputs | 1 |
| Output type | SPDT |
| Operating temperature | -10 °C to +55 °C |
| Protection class | IP40 (housing), IP20 (terminals) |
| Housing material | Polycarbonate |
Explains safety symbols like DANGER, WARNING, and CAUTION for user guidance.
Lists actions that constitute improper or unsafe use of the device.
Warns of potential electric shock hazards from electrical voltage.
Provides the manufacturer's contact details and website for inquiries.
Outlines the conditions governing the device's legal warranty.
Directs users to find manuals and technical datasheets online.
Describes the device's role in controlling solenoid valves.
Details the physical construction and components of the timer.
Explains the information presented on the device nameplates.
Specifies the operating environmental conditions for the device.
Lists the mechanical specifications and materials of the device.
Provides detailed electrical specifications, including power supply and output.
Safety precautions to follow during installation and wiring processes.
Illustrates the terminal connections for the 1078-1 model.
Illustrates the terminal connections for the 1078-2 model.
Safety precautions to observe before commissioning the device.
Safety precautions to be taken during device adjustment.
Detailed guide on how to adjust the settings of the 1078-1.
Explains the available time ranges for ON and OFF durations.
Guide on how to use potentiometers for precise time setting.
Explains the function of the buttons on the configuration module.
Describes the information shown on the configuration module's display.
Explains the different operating modes of the configuration module.
Guide on how to navigate the module's read-only display.
Details the various operating modes for the timer.
Explains the different reset functions available for the timer.
Safety precautions to be followed during maintenance.
Instructions for cleaning and maintaining the device.
Information on ordering original spare parts and accessories.
Guidelines for proper storage of the device to prevent damage.
