8045
p. 6/6
Available S020 Fitting DN
T-fitting S020
Welding tab S020
Fusion spigot S020
Screw-on S020
Saddle S020
DN200 DN350
DN65
DN50
DN200
DN100
DN50
DN100
DN400
DN400
DN65
Short sensor
Short sensor
Short sensor
Long sensor
Long sensor
Long sensor
Long sensor
DN 06
(1)
Interconnection possibilities with other Bürkert flow sensors
(1) DN 06 and DN 08 in stainless steel S020 only, 8045 with stainless steel sensor recommended
Type 5281 -
Solenoid valve
Type 2731 -
valve with
Type 1067 positioner SideControl
Type 6212 -
Solenoid valve
4-20 mA current
output
Relay output
Type 8045 -
Electromagnetic
flow transmitter
Type S020 -
Insertion fitting
(see corresp.
data sheet)
Relay output
Ordering chart - accessories for transmitter Type 8045 (has to be ordered separately)
Specifica-
tions
Item no.
Set with 2 cable glands M20 x 1.5 + 2 neoprene flat seals for cable gland or plug + 2 screw-plugs M20 x 1.5 +
2 multiway seals 2 x 6 mm
449 755
Set with 2 reductions M20 x 1.5 /NPT1/2” + 2 neoprene flat seals for cable gland or plug + 2 screw-plugs M20 x 1.5 551 782
Set with 1 stopper for unused cable gland M20 x 1.5 +1 multiway seal 2 x 6 mm for cable gland + 1 green FKM gasket for the
sensor + 1 mounting instruction sheet
558 102
Ring 619 205
PC union nut 619 204
PPA union nut 440 229
Set with 1 green FKM + 1 black EPDM gasket 552 111
3 points calibration certificate
(device combined with a S020 fitting, only for DN ≤ 200) 550 676
FDA - Approval (only stainless steel sensor version) 449 788
To find your nearest Bürkert facility, click on the orange box
www.burkert.com
In case of special application conditions,
please consult for advice.
Subject to alteration.
© Christian Bürkert GmbH & Co. KG
1010/13_EU-en_00891790
To Previous Page
Loading...
