10
8045
ENGLISH
INSTALLATION
1
2
3
5
4
3.2 INSTALLATION
The 8045 flow transmitter can be easily installed into pipes using our specially
designed fitting system S020.
DEUTSCH
The fitting 4 must be installed into the pipe according to the installation specifications
within section 3.1.
l Insert the plastic nut 3 onto the fitting 4 and snap the plastic ring 2 into the
guide -bush 5.
l Ensure that the sensor is fully inserted and sitting correctly, making sure that
the lug 6 is aligned correctly onto the fitting and that the sensor housing 1
cannot be rotated.
The plastic nut must only be tightened by hand!
6
Fig. 3.1 Installation of flow transmitter
3.2
To Next Page
Loading...
