Burkert 8045 - Page 18

18
8045
ENGLISH
OPERATION
4.1 OPERATING AND CONTROL GUIDE
LCD display
Measured value
Selection of parameters
and digits.
Keys Menu Mode Finding a value
Previous Menu Increase from the blinking digit
Next Menu Advance to the next digit
Activate the menu displayed Validate the displayed value
(If END is displayed,
save the modified
parameters and return
to the main menu
+ Resetting of the daily totalizer*. Modification of the decimal point:
2 Seconds
(only available within daily totalizer
Know the K-Factor and impulse
option § - 4.3)
volume
+ Access or return to the
CALIBRATION MENU*
5 Seconds
+ + Access or return to the TEST
MENU*
5 Seconds
* Only available within the main menu.
The Key can be locked to avoid accidental or unauthorized access.
For further information see sections 3.4.1 & 3.4.3.
Unit selected
Selection and
confirmation.
Indication of the state of
relay 1 and 2.
( LED on = closed contact )
Selection of parameters
and digits.
ENTER
4.1
ENTER
ENTER
ENTER
0......9
0......9
0......9
0......9